[NSRCA-discussion] Futaba servo help

[Wayne Galligan]

A side note to the 9411's.  You can center them mechanically through the output arm.  Takes a very small flat screwdriver.  It made setting up my bi-plane with 4 servos very easy.

Wayne Galligan
  ----- Original Message ----- 
  From: Dave 
  To: 'General pattern discussion' 
  Sent: Monday, December 27, 2010 6:26 PM
  Subject: Re: [NSRCA-discussion] Futaba servo help


  Dave,

   

  I'm guessing you probably know, but it is pretty easy to convert the 9411 to sa with a 911 gearset:

  http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPSG911

   

  Replace the middle three gears of the 9411 with the 911 nylon gears, and you've got a 9411sa.

   

  Regards,

   

  Dave Lockhart

  Team Horizon/JR/Spektrum/ThunderPower

   

   

   


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave Burton
  Sent: Monday, December 27, 2010 6:52 PM
  To: 'General pattern discussion'
  Subject: [NSRCA-discussion] Futaba servo help

   

  I need some help from some of you Futaba guys. Which Futaba mid size digital servo is best suited for ailerons on a 2M pattern ship? I'm not familiar with the numbers of Futaba's servos

  I'm looking for something comparable to the nylon gear JR 9411SA which has been discontinued.

  Thanks,

  Dave Burton



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20101228/a37c1118/attachment.html>