[NSRCA-discussion] Futaba servo help

[Vicente "Vince" Bortone]

I wonder if we can use the metal gears in electric planes with no problem. There is very low vibration so life could be good. Just replace the gears with nylon when develop slop.  
Vicente "Vince" Bortone
----- Original Message -----
From: Dave <DaveL322 at comcast.net>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Tue, 28 Dec 2010 00:26:55 -0000 (UTC)
Subject: Re: [NSRCA-discussion] Futaba servo help
Dave,
I'm guessing you probably know, but it is pretty easy to convert the 9411 to
sa with a 911 gearset:
http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPSG911
Replace the middle three gears of the 9411 with the 911 nylon gears, and
you've got a 9411sa.
Regards,
Dave Lockhart
Team Horizon/JR/Spektrum/ThunderPower
 _____ 
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave Burton
Sent: Monday, December 27, 2010 6:52 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] Futaba servo help
I need some help from some of you Futaba guys. Which Futaba mid size digital
servo is best suited for ailerons on a 2M pattern ship? I'm not familiar
with the numbers of Futaba's servos
I'm looking for something comparable to the nylon gear JR 9411SA which has
been discontinued.
Thanks,
Dave Burton