[NSRCA-discussion] Spongy Epoxy . . .

[Keith Hoard]

I've tried that . . . I even microwaved the left-overs.  It is the
consistency of tire rubber, so hopefully it will just peel right out . . .

On Fri, Aug 27, 2010 at 10:17 AM, Richard Lewis <humptybump at sbcglobal.net>wrote:

> You can try heat....put it in a hot car, warm oven, or wherever you can in
> an elevated temp environment for a while (several hours...) and see if it
> hardens...no harm in trying...
>
> Richard
>
>  ------------------------------
> *From:* Pete Cosky <pcosky at comcast.net>
> *To:* General pattern discussion <nsrca-discussion at lists.nsrca.org>
> *Sent:* Fri, August 27, 2010 10:11:21 AM
> *Subject:* Re: [NSRCA-discussion] Spongy Epoxy . . .
>
> 
> Keith, it may be better to err on the side of
> caution.....scrape...sand....apply new epoxy...
>
> ----- Original Message -----
> *From:* Keith Hoard <khoard at gmail.com>
> *To:* General pattern discussion <nsrca-discussion at lists.nsrca.org>
> *Sent:* Friday, August 27, 2010 10:49 AM
> *Subject:* [NSRCA-discussion] Spongy Epoxy . . .
>
> Gentlemen,
>
>   Is there any fix for epoxy that hasn't cured in several days other than
> peeling it out and trying again?  I must have gotten the mixture wrong. . .
> . the front side is hard as a rock, but the back side is still spongy . .
> (front and back were done on separate days. . )
>
>
> --
>
> Keith Hoard
> Collierville, TN
> khoard at gmail.com
>
>
>  ------------------------------
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 

Keith Hoard
Collierville, TN
khoard at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100827/2bcb4e8c/attachment.html>