[NSRCA-discussion] Spongy Epoxy . . .

[Richard Lewis]

You can try heat....put it in a hot car, warm oven, or wherever you can in an 
elevated temp environment for a while (several hours...) and see if it 
hardens...no harm in trying...

Richard




________________________________
From: Pete Cosky <pcosky at comcast.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, August 27, 2010 10:11:21 AM
Subject: Re: [NSRCA-discussion] Spongy Epoxy . . .

 
Keith, it may be better to err on the side of caution.....scrape...sand....apply 
new epoxy...
----- Original Message ----- 
>From: Keith Hoard 
>To: General pattern discussion 
>Sent: Friday, August 27, 2010 10:49 AM
>Subject: [NSRCA-discussion] Spongy Epoxy . . .
>
>Gentlemen,
>
>  Is there any fix for epoxy that hasn't cured in several days other than 
>peeling it out and trying again?  I must have gotten the mixture wrong. . . . 
>the front side is hard as a rock, but the back side is still spongy . . (front 
>and back were done on separate days. . )
>
>
>-- 
>
>Keith Hoard
>Collierville, TN
>khoard at gmail.com
>
>
>
________________________________
_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100827/df1f272e/attachment.html>