[NSRCA-discussion] Spongy Epoxy . . .

[Bob Richards]

You might try sticking it in your car, on a hot day in the sun. I usually do that anyway, after the epoxy has begun to harden. 

--- On Fri, 8/27/10, Keith Hoard <khoard at gmail.com> wrote:


From: Keith Hoard <khoard at gmail.com>
Subject: Re: [NSRCA-discussion] Spongy Epoxy . . .
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Friday, August 27, 2010, 11:16 AM


Yeah, that's what I figured. . . just hoping someone out there had a secret procedure.  


On Fri, Aug 27, 2010 at 10:11 AM, Pete Cosky <pcosky at comcast.net> wrote:



Keith, it may be better to err on the side of caution.....scrape...sand....apply new epoxy...


----- Original Message ----- 
From: Keith Hoard 
To: General pattern discussion 
Sent: Friday, August 27, 2010 10:49 AM
Subject: [NSRCA-discussion] Spongy Epoxy . . .




Gentlemen,

  Is there any fix for epoxy that hasn't cured in several days other than peeling it out and trying again?  I must have gotten the mixture wrong. . . . the front side is hard as a rock, but the back side is still spongy . . (front and back were done on separate days. . )


-- 

Keith Hoard
Collierville, TN
khoard at gmail.com






_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



-- 

Keith Hoard
Collierville, TN
khoard at gmail.com



-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100827/9aa193a3/attachment.html>