[NSRCA-discussion] ESC settings for Outrunners??

[Patterndude]

Thanks!!  This is great. I'm surprised how skittish I've become in preparing this plane as I don't want something as simple as a config setting to force a scrap part

Sent from my iPhone

On Aug 21, 2010, at 3:03 PM, Chris <cjm767driver at hotmail.com> wrote:

> Lance,
> 
> Here is a link with step by step settings.  The 80HV and 85HV will use similar settings.
> 
> http://electric-f3a.com/smf/index.php?topic=214.0
> 
> Chris
> 
> On 8/21/2010 1:52 PM, Lance wrote:    
>> 
>> Pardon the obvious newbie question.  I'm trying to do the final setup of my first e-symphony with a           Phoenix HV85 and Pletty EVO outrunner.  I connected to the ESC with a Castle Link and there are lots of settings available but I don't know what should be the best starting setup and I haven't seen any "settings files" from experienced people shared to help newbies get started.  The factory defaults clearly will NOT work because I can see at least one setting that can't be right: PWM Switching Rate set to 12 kHz but there is an Outrunner Mode option available...
>>  
>> Can anyone point me to some information or help me to the next step?
>>  
>> --Lance
>> 
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100821/0cbdc4bf/attachment.html>