[NSRCA-discussion] ESC settings for Outrunners??

[Chris]

  Lance,

Here is a link with step by step settings.  The 80HV and 85HV will use 
similar settings.

http://electric-f3a.com/smf/index.php?topic=214.0

Chris

On 8/21/2010 1:52 PM, Lance wrote:
> Pardon the obvious newbie question.  I'm trying to do the final setup 
> of my first e-symphony with a Phoenix HV85 and Pletty EVO outrunner.  
> I connected to the ESC with a Castle Link and there are lots of 
> settings available but I don't know what should be the best starting 
> setup and I haven't seen any "settings files" from experienced people 
> shared to help newbies get started.  The factory defaults clearly will 
> NOT work because I can see at least one setting that can't be right: 
> PWM Switching Rate set to 12 kHz but there is an Outrunner Mode option 
> available...
> Can anyone point me to some information or help me to the next step?
> --Lance
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100821/0afc938f/attachment.html>