[NSRCA-discussion] ESC settings for Outrunners??

[Ron Van Putte]

Lance - Your experience is the same one facing almost all newbie E- 
pilots.  The learning curve is very steep.  Someone will chime in to  
help you with your particular setup.  I can't because I don't fly  
Plettenberg motors (Dave Lockhart?).

Ron

On Aug 21, 2010, at 12:52 PM, Lance wrote:

> Pardon the obvious newbie question.  I'm trying to do the final  
> setup of my first e-symphony with a Phoenix HV85 and Pletty EVO  
> outrunner.  I connected to the ESC with a Castle Link and there are  
> lots of settings available but I don't know what should be the best  
> starting setup and I haven't seen any "settings files" from  
> experienced people shared to help newbies get started.  The factory  
> defaults clearly will NOT work because I can see at least one  
> setting that can't be right: PWM Switching Rate set to 12 kHz but  
> there is an Outrunner Mode option available...
>
> Can anyone point me to some information or help me to the next step?
>
> --Lance
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion