[NSRCA-discussion] Full scale bipe vs RC plane

[Jon Lowe]

It was Saturday.  I was judging John Fuqua, and all of a sudden this airplane is 20 feet off the deck.  Came out of nowhere. Had not circled the field first or done anything else to let us know he wanted to land.   Endangered himself, and us too. It as clear there was an event going on, and it was announced beforehand.   Al Glenn had a little "chat" with him after he landed.


There are idiots everywhere.  You never know when one will strike.


Jon Lowe



-----Original Message-----
From: Keith Hoard <khoard at gmail.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Fri, Aug 20, 2010 8:08 am
Subject: Re: [NSRCA-discussion] Full scale bipe vs RC plane


Same thing happened at Mac Hodges field a few years ago.  I believe it was Friday warm-ups, and this guy in a Bonanza came out of nowhere with a low pass down the runway.  

Unfortunately, if you're flying at an uncontrolled field and nobody is talking on the radio all you have is "see and avoid" . . . 


On Fri, Aug 20, 2010 at 7:04 AM, Bob Richards <bob at toprudder.com> wrote:



I watched the video last night, but now the video has been "removed by the user".  I wonder if everyone is trying to keep this quiet now. The video will probably end up being evidence in an investigation.
 
Someone is at fault. Hard to tell who. From watching the video, and from the description below, I doubt the model flyer was at fault since it appeared that he had permission, and the runway was supposed to be shut down - I think he had every right to assume it was safe for him to fly. When told to fly away, he did. 
 
Very lucky that no one was hurt.
 
As model pilots, what can we learn from this? Always have a spotter. Not someone standing there saying "wow, bring it down lower" but someone with their head on a swivel watching out for traffic.
 
I was flying a model at a private grass strip years ago and had just taken off. A guy drove up, got into his Pitts biplane and took off - he knew I was there. I thought it would be no problem, I just turned around and flew away from the runway. But, after he took off, he made a big circle and buzzed the field. Luckily, I had someone telling me what he was doing. I had to fly my model almost down into the tree tops to get out of his way. If anything had happened, I would have felt like it would have been the other guy's fault, but I'm sure the media would have reported it in such a way that model airplanes would have gotten a bad rap, which is what will probably happen now.
 
Bob R.
 

--- On Wed, 8/18/10, Bill's Email <wemodels at cox.net> wrote:


From: Bill's Email <wemodels at cox.net>
Subject: Re: [NSRCA-discussion] Full scale bipe vs RC plane
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, August 18, 2010, 9:46 AM


mike mueller wrote:
> http://www.youtube.com/watch?v=p3GHqMObjcM&feature=player_embedded#!
>  I've seen this but I can't figure out why they were allowing RC planes to fly on an active runway. This seems like total kaos. Mike
Here is what I know about it:

The location was Brighton Van-Aire airport (CO12) north of Denver.
This is an uncontrolled field. There are no requirements for radios or any communications.
There are no ATC personnel or facilities involved in operations at this airport.
It happened during a charity event being held at the privately owned airpark (people have hangars at their homes).
The biplane pilot lives there. He reportedly landed and parked his plane in his hangar after the incident.
The RC plane was flying a planned demo.
The fellow with the radio was the "airboss" for the event.
He has no official powers or authority.
The biplane required no clearance or permission to land or make the low pass.
A NOTAM was not filed for the event.
The biplane was damaged. (not sure to what extent)
Nobody was injured.
Incident reports have been filed with the FAA and NTSB.

This is gleaned from a number of sources, including several threads on RCU, Flying Giants, and the AMA forum.
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




-- 

Keith Hoard
Collierville, TN
khoard at gmail.com



 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100820/6bfc21f3/attachment.html>