[NSRCA-discussion] Pull - Pull cable

[Dave]

I've been using the vinyl coated Kevlar from ACP (Kev-Cord) for many years
and never had a problem.

On foamies, the foam itself shrinks/expands quite a bit with temperature,
and causes problems when using Kevlar on pull pull.  Best thing I've found
on the foamies is monofilament Spyder fishing line.

Regards,

Dave



-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of GEORGE KENNIE
Sent: Monday, April 26, 2010 1:20 PM
To: scott at rcfoamy.com; General pattern discussion
Subject: Re: [NSRCA-discussion] Pull - Pull cable

I'm with Scott on this one Anthony. The kevlar stuff says it wont stretch, 
but the stuff I've used on my foamy
planes seems to periodically need tightening.

It's frustrating enough that I just used a pull-pull sullivan steel install 
on a newly completed foamy.

G.





----- Original Message ----- 
From: <scott at rcfoamy.com>
To: "Nsrca" <NSRCA-discussion at lists.nsrca.org>
Sent: Monday, April 26, 2010 9:41 AM
Subject: Re: [NSRCA-discussion] Pull - Pull cable


>I found the  aramid does not hold trim with temp changes... Went back 
>leader line..
>
> My 2 cents
>
> Scott
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: Anthony Romano <anthonyr105 at hotmail.com>
> Date: Mon, 26 Apr 2010 09:26:29
> To: <nsrca-discussion at lists.nsrca.org>
> Subject: [NSRCA-discussion] Pull - Pull cable
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion