[NSRCA-discussion] Pull - Pull cable

mike mueller mups1953 at yahoo.com
Mon Apr 26 09:51:11 AKDT 2010


 I've been using the same stuff as Dave and it's really easy to use. I think it comes in 6 yard length's. Mike

--- On Mon, 4/26/10, Dave <DaveL322 at comcast.net> wrote:

> From: Dave <DaveL322 at comcast.net>
> Subject: Re: [NSRCA-discussion] Pull - Pull cable
> To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>, scott at rcfoamy.com
> Date: Monday, April 26, 2010, 12:26 PM
> I've been using the vinyl coated
> Kevlar from ACP (Kev-Cord) for many years
> and never had a problem.
> 
> On foamies, the foam itself shrinks/expands quite a bit
> with temperature,
> and causes problems when using Kevlar on pull pull. 
> Best thing I've found
> on the foamies is monofilament Spyder fishing line.
> 
> Regards,
> 
> Dave
> 
> 
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of GEORGE KENNIE
> Sent: Monday, April 26, 2010 1:20 PM
> To: scott at rcfoamy.com;
> General pattern discussion
> Subject: Re: [NSRCA-discussion] Pull - Pull cable
> 
> I'm with Scott on this one Anthony. The kevlar stuff says
> it wont stretch, 
> but the stuff I've used on my foamy
> planes seems to periodically need tightening.
> 
> It's frustrating enough that I just used a pull-pull
> sullivan steel install 
> on a newly completed foamy.
> 
> G.
> 
> 
> 
> 
> 
> ----- Original Message ----- 
> From: <scott at rcfoamy.com>
> To: "Nsrca" <NSRCA-discussion at lists.nsrca.org>
> Sent: Monday, April 26, 2010 9:41 AM
> Subject: Re: [NSRCA-discussion] Pull - Pull cable
> 
> 
> >I found the  aramid does not hold trim with temp
> changes... Went back 
> >leader line..
> >
> > My 2 cents
> >
> > Scott
> > Sent from my Verizon Wireless BlackBerry
> >
> > -----Original Message-----
> > From: Anthony Romano <anthonyr105 at hotmail.com>
> > Date: Mon, 26 Apr 2010 09:26:29
> > To: <nsrca-discussion at lists.nsrca.org>
> > Subject: [NSRCA-discussion] Pull - Pull cable
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 


      


More information about the NSRCA-discussion mailing list