[NSRCA-discussion] Pull - Pull cable

[GEORGE KENNIE]

I'm with Scott on this one Anthony. The kevlar stuff says it wont stretch, 
but the stuff I've used on my foamy
planes seems to periodically need tightening.

It's frustrating enough that I just used a pull-pull sullivan steel install 
on a newly completed foamy.

G.





----- Original Message ----- 
From: <scott at rcfoamy.com>
To: "Nsrca" <NSRCA-discussion at lists.nsrca.org>
Sent: Monday, April 26, 2010 9:41 AM
Subject: Re: [NSRCA-discussion] Pull - Pull cable


>I found the  aramid does not hold trim with temp changes... Went back 
>leader line..
>
> My 2 cents
>
> Scott
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: Anthony Romano <anthonyr105 at hotmail.com>
> Date: Mon, 26 Apr 2010 09:26:29
> To: <nsrca-discussion at lists.nsrca.org>
> Subject: [NSRCA-discussion] Pull - Pull cable
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion