[NSRCA-discussion] Shorting plug with 2.4

[James Oddino]

Anthony, what motor and ESC are you using?

Jim


On Nov 20, 2009, at 5:55 AM, Anthony Romano wrote:

>  Hi Chris,
>  
>      Never used one but like the idea. I use the throttle cut function on the SD-10. It is set to a switch so when not flying my TX is always in the throttle cut position. When my caller puts the plane down I flip the switch and my motor starts at the lowest possible idle with the trim centered. If I need to adjust my idle I can do it with the trim.
>     Since all of the switches are 3 position my next experiment is to use the idle up function to set the brake on the middle switch position. 
>     Has the E-motion flown yet?
>  
> Anthony
>  
> Date: Fri, 20 Nov 2009 00:12:51 -0800
> From: homeremodeling2003 at yahoo.com
> To: nsrca-discussion at lists.nsrca.org
> Subject: [NSRCA-discussion] Shorting plug with 2.4
> 
> What are your thoughts on using a shorting plug with the 2.4 systems. I always used them before, but now with my new system, I'm not sure it's necessary. 
> 
> Thanks!
>  
> Chris
>  
>  
>  
> 
> 
> 
> Hotmail: Trusted email with powerful SPAM protection. Sign up now. _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091120/65859db5/attachment.html>