[NSRCA-discussion] Shorting plug with 2.4

[Anthony Romano]

 Hi Chris,

 

     Never used one but like the idea. I use the throttle cut function on the SD-10. It is set to a switch so when not flying my TX is always in the throttle cut position. When my caller puts the plane down I flip the switch and my motor starts at the lowest possible idle with the trim centered. If I need to adjust my idle I can do it with the trim.

    Since all of the switches are 3 position my next experiment is to use the idle up function to set the brake on the middle switch position. 

    Has the E-motion flown yet?

 

Anthony
 


Date: Fri, 20 Nov 2009 00:12:51 -0800
From: homeremodeling2003 at yahoo.com
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Shorting plug with 2.4




What are your thoughts on using a shorting plug with the 2.4 systems. I always used them before, but now with my new system, I'm not sure it's necessary. 

Thanks!

 
Chris 
 
 
 


 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091120/c91610d8/attachment.html>