[NSRCA-discussion] Wing adjuster tube

[Dr Mike]

I use a 1" squarex1/4" thick piece of hardwood, drilled to fit adjuster.  It
can be trimmed a bunch to fit any wing and will not wear out.  The trick is
using the correct drill bit.  Measure it and away you go.

mike

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
LCREELER at aol.com
Sent: Tuesday, November 10, 2009 8:08 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Wing adjuster tube

 

Need wing adjuster tubes. Have adjusters need wing side tube.

Thanks 

Mike

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091110/9093cc18/attachment.html>