[NSRCA-discussion] Fataba 14 MZ

[James Oddino]

I do the same.  Can't beat it.

Jim


On Nov 2, 2009, at 12:09 PM, Earl Haury wrote:

> I use a simple Velcro strap, about 6" long,  added to the TX strap  
> (through the plastic "adjustment loop" & taped). A small Velcro  
> sticky back pad is affixed to the bottom of the TX case. Unobtrusive  
> & easy to use.
>
> Earl
> ----- Original Message -----
> From: Derek Koopowitz
> To: General pattern discussion
> Sent: Monday, November 02, 2009 1:10 PM
> Subject: Re: [NSRCA-discussion] Fataba 14 MZ
>
> Verne,
>
> I did not use the device that was shown in the link - I used a  
> similar device starting early this year and after about 5 months of  
> use I picked up my TX to clip the TX strap onto the device and the  
> entire device pulled the TX clip attachment and bolt from the TX  
> case.  Any device which changes the angle of attachment will put a  
> strain on the TX attachment clip and I am sure that it will fail at  
> some point.
>
> I had to have a brand new face plate put on my 14MZ... thanks to  
> Hobbico for getting it done quickly.
>
> -Derek
>
> On Mon, Nov 2, 2009 at 10:58 AM, <verne at twmi.rr.com> wrote:
> Hi Mike,
> Sounds like your warning is coming from experience. Care to  
> elaborate? I've been using mine for over a season without a problem,  
> but it would be handy to know what to avoid if there's a problem.
>
> Thanks!
> Verne
>
>
> ---- Dr Mike <drmikedds at sbcglobal.net> wrote:
>
> =============
> Be careful in using it.  It will break your tx casing if abused.
>
> mike
>
>
>
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne  
> Koester
> Sent: Sunday, November 01, 2009 7:19 PM
> To: 'General pattern discussion'
> Subject: Re: [NSRCA-discussion] Fataba 14 MZ
>
>
>
> Hi Jerry,
>
> Here's the link for what you need, I've been using it for over a  
> year and it
> works great - perfect balance.
>
>
>
> http://www.helicopterjohn.com/
>
>
>
> Verne
>
>
>
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gerald
> Gallagher
> Sent: Sunday, November 01, 2009 7:32 PM
> To: 'General pattern discussion'
> Subject: [NSRCA-discussion] Fataba 14 MZ
>
>
>
>  Has anyone made or found  a manufactured devise that will fit on  
> the Fataba
> 14 MZ that will improve the balance, (CG) better when using the 2.4  
> antenna?
>
>  Thanks
>
>
>
> Jerry Gallagher
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091102/ce72c9e2/attachment.html>