[NSRCA-discussion] Fataba 14 MZ

Dr Mike drmikedds at sbcglobal.net
Mon Nov 2 11:12:48 AKST 2009


Verne,

I heard about this at the last contest from someone who saw this happen.

Mike 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Derek
Koopowitz
Sent: Monday, November 02, 2009 1:11 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Fataba 14 MZ

 

Verne,

 

I did not use the device that was shown in the link - I used a similar
device starting early this year and after about 5 months of use I picked up
my TX to clip the TX strap onto the device and the entire device pulled the
TX clip attachment and bolt from the TX case.  Any device which changes the
angle of attachment will put a strain on the TX attachment clip and I am
sure that it will fail at some point.

 

I had to have a brand new face plate put on my 14MZ... thanks to Hobbico for
getting it done quickly.

 

-Derek

On Mon, Nov 2, 2009 at 10:58 AM, <verne at twmi.rr.com> wrote:

Hi Mike,
Sounds like your warning is coming from experience. Care to elaborate? I've
been using mine for over a season without a problem, but it would be handy
to know what to avoid if there's a problem.

Thanks!
Verne


---- Dr Mike <drmikedds at sbcglobal.net> wrote:

=============
Be careful in using it.  It will break your tx casing if abused.

mike



From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne Koester
Sent: Sunday, November 01, 2009 7:19 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Fataba 14 MZ



Hi Jerry,

Here's the link for what you need, I've been using it for over a year and it
works great - perfect balance.



http://www.helicopterjohn.com/



Verne



From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gerald
Gallagher
Sent: Sunday, November 01, 2009 7:32 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] Fataba 14 MZ



 Has anyone made or found  a manufactured devise that will fit on the Fataba
14 MZ that will improve the balance, (CG) better when using the 2.4 antenna?

 Thanks



Jerry Gallagher
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091102/a3e1cc64/attachment.html>


More information about the NSRCA-discussion mailing list