[NSRCA-discussion] 14MZ encoders
John Pavlick
jpavlick at idseng.com
Tue Mar 17 19:39:36 AKDT 2009
Yes the 12Z has the same encoders as the 14Mz. I just had mine replaced for
free during the annual checkup. Mine had the "old" blue ones and it was
about 2 or 3 years old. It just started showing signs of problems.
John Pavlick
http://www.idseng.com
----- Original Message -----
From: "Stuart Chale" <schale at optonline.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, March 17, 2009 8:52 PM
Subject: Re: [NSRCA-discussion] 14MZ encoders
> It is easy to tell if you have the new or old. Just pull off the back
> cover. The new ones are white the old were blue. If your radio is really
> only 1 year old then it should have the new ones. With an encoder issue
> from what I have read you experience typical pot issues, jumpiness around
> a certain point. Should be repeatable. Also possible shifting neutral
> (trim). The new white ones have a better cycle life. Unfortunately it is
> difficult to be sure what some of the issues might be as it seems Futaba
> just replaces them when a radio is sent in for whatever reason or problem
> if they are the original ones. Mine were replaced when I sent it in for a
> screen issue. Generally Futaba denies any problems and just fixes the
> item when sent in. As I understand it the 12Z has the identical stick
> assembly/encoders as the 14. I recently called Futaba about a 12 with the
> blue encoders and was told by a technician that only the 14 had issues.
> Don't think I really believe that.
>
> Stuart C.
>
> James Oddino wrote:
>>
>> I seem to remember a thread about someone with bad pots in a 14MZ
>> (Adrian?). The last couple of sessions I'm aware of an intermittent
>> delay before the airplane responds to an aileron command. It is not on
>> every flight and usually only once per flight. Only on aileron at
>> neutral. It never holds any other position.
>>
>> Ny system is just a little over one year old. I thought it had the
>> latest "encoders". Time to send it to the hospital?
>>
>> Jim O
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list