[NSRCA-discussion] Arming plug manufacturer and source?

[mike mueller]

 Thanks Bill

--- On Thu, 6/11/09, Bill's Email <wemodels at cox.net> wrote:

> From: Bill's Email <wemodels at cox.net>
> Subject: Re: [NSRCA-discussion] Arming plug manufacturer and source?
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Thursday, June 11, 2009, 2:36 PM
> mike mueller wrote:
> >  I agree that the 5.5mm are the best but the 6mm
> bullets are about half the weight. Since weight means so
> much it becomes an important factor. Unless you fly the 2
> designs out there that have no problem making weight but
> that's a whole can of whoop a----- that I don't want to
> rehash over and over again. I'm going to try Chad's 4MM idea
> next.
> >  Plus the 5.5MM's are pricy. M2
> >   
> 
> The 5.5mm actually have more surface area than the 6mm do.
> A pair of 5.5mm is 5 grams. A pair of 6mm is 4 grams. So for
> three sets the 5.5 will cost you 3 grams of weight (0.106
> ounces).
> 
> I buy my 5.5 bullets from Offshoreelectrics.com
> 
> http://www.offshoreelectrics.com/proddetail.php?prod=ose-55bullet
> 
> I buy 10 pairs at  a time. $1.75 a pair that way.
> Dean's cost more than that.
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>