[NSRCA-discussion] Question for Integral drivers running glow

[Ed Alt]

Thanks Carl.  I think I'll skip using them.

Ed
  ----- Original Message ----- 
  From: CHV69 at aol.com 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Saturday, February 07, 2009 9:33 AM
  Subject: Re: [NSRCA-discussion] Question for Integral drivers running glow


  In a message dated 2/7/2009 9:17:30 A.M. Eastern Standard Time, ed_alt at hotmail.com writes:
    I'm debating whether to use the elevator control horns that are provided with the Integral.  The concern is that the holes will wear due to oil & grit getting in there.  It might be better to go with a system where I can replace the control arm portion when necessary.  What does experience in the field say?

  The holes DO in fact wear fairly quickly.
   I have moved to new holes twice already.
  I have heard it is an easy repair when you run out of acceptable hole locations.
  Make the holes bigger and insert a bearing or bushing. You could actually do that first.

  If I were to do it over I would use a different horn.

  Carl
  Although I haven't had to do it yet.


------------------------------------------------------------------------------
  Great Deals on Dell Laptops. Starting at $499.


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090207/98b4f8c1/attachment.html>