[NSRCA-discussion] Futaba Servos

[James Oddino]

On my 2.6 meter Extra I put regulators on each servo and ran the 8 volts from the battery all around the plane.  I was trying to eliminate voltage drop rather than weight but it does reduce the number and weight of wires to the rear end and to wings with multiple servos.

Jim O


On Dec 11, 2009, at 9:43 AM, Bob Richards wrote:

> I've often thought about going with common + and - wires with an upgraded wire size. Then go tiny with the signal wires. There is no reason to go with a large gauge on the signal wires.
>  
> Bob R.
> 
> --- On Fri, 12/11/09, Ed Alt <ed_alt at hotmail.com> wrote:
> Sorry, I meant to say common power leads (+ and - ) for both servos.  The only unique lead is the signal lead.  Test it well before flying.
>  
> Ed
>  
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091211/998bafc9/attachment.html>