[NSRCA-discussion] SD-10

[James Oddino]

What is the frame rate and the servo update rate?

Jim O


On Aug 25, 2009, at 2:12 PM, Bob Richards wrote:

> RE: Stick centering. The Hitec servo programmers can read the pulse  
> width down to 1us I believe. Plug it into a receiver output and put  
> it in the right mode and it will display the pulse width.
>
> RE: Latency comparisons, pullled this from the web:
>
> These latency findings were taken using carefully contructed and  
> consistent methods to ensure they are as accurate as possible. As of  
> May 2009
>
> Airtronics SD-10G:
> Min: 7.36ms
> Max: 16.3ms
> Ave: 11.83ms
>
> Futaba 10C (Futaba is a Trademark of Futaba Corporation and Dist by  
> Great Planes):
> Min: 9ms
> Max: 29ms
> Ave: 19ms
>
> JR 9303 & R1221rx (JR is a Trademark of JR Radios Japan and Dist by  
> Horizon Hobby)
> Min: 25ms
> Max: 47ms
> Ave: 36ms
>
> JR 12X
> Min: 21.5ms
> Max: 43.5ms
> Ave: 32.5ms
>
> Of course, this was in an ad for Airtronics. ;-)
>
>
> Bob R.
>
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090825/575d2815/attachment.html>