[NSRCA-discussion] SD-10

[John Pavlick]

Very interesting. Keep in mind all BUT the Airtronics are 2048 resolution however. This sort of confirms what I said about the Airtronics design decision. :)
 
John Pavlick

--- On Tue, 8/25/09, Bob Richards <bob at toprudder.com> wrote:


From: Bob Richards <bob at toprudder.com>
Subject: Re: [NSRCA-discussion] SD-10
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Tuesday, August 25, 2009, 5:12 PM







RE: Stick centering. The Hitec servo programmers can read the pulse width down to 1us I believe. Plug it into a receiver output and put it in the right mode and it will display the pulse width.
 
RE: Latency comparisons, pullled this from the web:
 

These latency findings were taken using carefully contructed and consistent methods to ensure they are as accurate as possible. As of May 2009 

Airtronics SD-10G: 
Min: 7.36ms 
Max: 16.3ms 
Ave: 11.83ms

Futaba 10C (Futaba is a Trademark of Futaba Corporation and Dist by Great Planes): 
Min: 9ms 
Max: 29ms 
Ave: 19ms

JR 9303 & R1221rx (JR is a Trademark of JR Radios Japan and Dist by Horizon Hobby) 
Min: 25ms 
Max: 47ms 
Ave: 36ms 

JR 12X 
Min: 21.5ms 
Max: 43.5ms 
Ave: 32.5ms 

Of course, this was in an ad for Airtronics. ;-) 
  
Bob R. 
  

 
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090825/544f4444/attachment.html>