[NSRCA-discussion] Futaba Repair Centre

Richard Strickland pamrich47 at hotmail.com
Fri Apr 3 07:02:26 AKDT 2009


Dunno--never had a need for one....

RS
 


From: ed_alt at hotmail.com
To: jpavlick at idseng.com; nsrca-discussion at lists.nsrca.org
Date: Fri, 3 Apr 2009 08:50:26 -0500
Subject: Re: [NSRCA-discussion] Futaba Repair Centre




You Futaba guys need a repair center for your radios?!!!  :)
 
Ed

----- Original Message ----- 
From: John Pavlick 
To: General pattern discussion 
Sent: Friday, April 03, 2009 7:31 AM
Subject: Re: [NSRCA-discussion] Futaba Repair Centre






I just had my 12Z serviced using the non-expedited shipping method and I had it back a little over a week after I sent it in. I'm in the USA however.
 
I fast charge Ni packs inside the Tx all the time using a Sirius charger. For overnight / slow charging I use either a plug-in wall-wart type of charger (like the one that came with the radio) or my Litco Alpha-4. I don't know if the Triton is really intended for slow charging (C/10) but if you did in fact have it set for C/10 I don't know why it would have melted the pack. You can usually leave a battery on slow charge for 15-20 hours and it's not even warm when you're finished charging. 
 
John Pavlick

--- On Fri, 4/3/09, Walter Nasse <wnasse at telus.net> wrote:

From: Walter Nasse <wnasse at telus.net>
Subject: [NSRCA-discussion] Futaba Repair Centre
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Date: Friday, April 3, 2009, 3:56 AM

BlankHello All

I just finished extracting a melted battery cartridge out of my 9Z
transmitter.

I put the NiCad battery on charge last night with my trusty Triton set at .2
A as I have done many times before. (Pack was still inside the transmitter)

A while later I went to check the charge progress and noticed a burning
smell and the charger had stopped chargeing.

The plastic case was fused to the internal battery compartment.

Needless to say that will have been the last time I charge a pack inside the
transmitter.

What is the usual turnaround time for the Futaba Repair Center? How do you
usually ship transmitters?  What do you include?

I have to ship from Canada

I'm still a little shocked as this is the first time something like this
has
happend to me in 30 years of flying.

Walter



No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.557 / Virus Database: 270.11.38/2037 - Release Date: 4/2/2009
6:09 AM
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_________________________________________________________________
Windows Live™: Keep your life in sync.
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_042009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090403/c09ff122/attachment.html>


More information about the NSRCA-discussion mailing list