[NSRCA-discussion] 9303 dual elevator setup....

[Troy Newman]

No you don't use a match box for it.
 
 
Go to page A-14 in the manual.
 
This is where is talks about Dual channels.  You can Mate the Aux 2
channel to the Elevator and it will rename the Aux 2 channel to Left
Elevator and the elevator channel will be come Right elevator.
 
Then its done...
 
A real quickie is  go into the device select menu and "INH" aux 2.
 
Then go to the win type menu and scroll over to the Elev in the row
marked as "MATE" press the roller bar and it will bring up the options
of which servos to mate it up...Aux2 and any other channels you INH in
the device select menu are eligible.
 
Select the Aux and and its done.
 
No mixes needed...and of by the way the trim tab will move both
elevators too the program mix won't
 
Then its done Set you subtrims and Travel volumes separately for each
servo and its a done deal.
 
If you have any more questions contact me and I can walk you through it
step by step. I have also posted this setup in the RCU Focus Sport build
thread. Its a piece of cake
 
Troy Newman
Team JR

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jay
Marshall
Sent: Sunday, May 25, 2008 2:42 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] 9303 dual elevator setup....



I assume you are using dual servos? Try a Futaba SR-10 Dual Servo
Reverser (Tower)

 

Jay Marshall 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Royce
Dorsett
Sent: Sunday, May 25, 2008 5:30 PM
To: General pattern discussion
Subject: [NSRCA-discussion] 9303 dual elevator setup....

 

 

 

Trying to figure out how to set up a duel elevator setup with a 9303....
Can anyone please help?

 

Thanks,

 

Royce 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080526/c5c90c56/attachment.html