[NSRCA-discussion] Embarrassing Programming Problem

[Del Rykert]

When my Airtroinics did this Ron it was wore pots as Troy mentioned.  That cured mine and was Elev. also for me. 
 
 
    Del 

----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, May 06, 2008 8:14 AM
Subject: Re: [NSRCA-discussion] Embarrassing Programming Problem


> Yes, I'm using dual rates within the same flight condition with the  
> dual rate elevator switch.
> 
> Maybe it's time for this discussion to move off the Discussion List;  
> I thought someone might have a "eureka" solution quickly.  I  
> appreciate all the help and suggestions on this and I will report  
> back to the List when/if I discover the solution.
> 
> Ron
> 
> On May 6, 2008, at 12:00 AM, Verne Koester wrote:
> 
>> Ron,
>> Are you actually using dual rates within the same flight condition  
>> with the
>> switch or getting the dual rate by going to a different flight  
>> condition? If
>> you're going to a different flight condition, then the problem  
>> could be
>> different trim settings or a different rate of trim on the second  
>> flight
>> condition. It helps to remember that a flight condition is  
>> essentially a
>> whole new model and almost EVERYTHING can be changed. Your subtrims  
>> could be
>> the problem as well. Hope this helps.
>>
>> Verne
>>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080506/0346b689/attachment.html