[NSRCA-discussion] Wheels for skinny pants

[Chad Northeast]

MPI makes a metal hub wheel that is pretty light but a little wider than the really skinny ones that would probably fit the CARF/ZN wheelpants.  Also it has a harder rubber ring around it so the soft foam does not wear as fast.

http://www.maxxprod.com/mpi/mpi-29.html

Maybe someone has a set on the list and can send you the width!

Chad

----- Original Message -----
From: Ron Van Putte <vanputte at cox.net>
Date: Tuesday, March 18, 2008 8:56 pm
Subject: Re: [NSRCA-discussion] Wheels for skinny pants
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>

> I didn't see a response to Colin's request.  I have some 
> new MK  
> (plastic hub) wheels, but none are quite big enough.  2.5" 
> is  
> approximately 63.5mm.  The biggest MK wheel I have is 
> 50mm.  I can  
> measure it, but don't know how much to scale up the width 
> dimension  
> to represent a 63.5mm wheel.
> 
> Ron Van Putte
> 
> On Mar 18, 2008, at 8:37 AM, colin chariandy wrote:
> 
> > Can anyone measure the width of MK and Tetra (plastic hub) 
> wheels,  
> > 2.5" diameter? I'm trying to find out which wheels will fit 
> into  
> > the skinny pants that come with the CompARF Integral. They 
> look  
> > cool...so I would like to try to use them. I know the really 
> thin  
> > MPI wheels will fit but our local feild tends to be soft for 
> quite  
> > a while, the thin wheels may dig in.
> >
> > Also, where can we find MK wheels in North America?
> >
> > Thanks all.
> > Colin
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080319/e4a26091/attachment.html