[NSRCA-discussion] O-Ring for Hatori Short Pipe

[John Konneker]

Mark,
You might be right.  I'm in the same boat you are and ordered some from McM Carr to try.  I am sure
we'll find out soon enough from our fellow pilots here on the list.
We'll keep our fingers crossed!
:-)
JLK


Date: Thu, 26 Jun 2008 15:32:45 -0400From: atwoodm at paragon-inc.comTo: nsrca-discussion at lists.nsrca.orgSubject: Re: [NSRCA-discussion] O-Ring for Hatori Short Pipe
I’ll need to measure again, but I was thinking the inner diameter needed to be 15mm...On 6/26/08 3:25 PM, "John Konneker" <jlkonn at hotmail.com> wrote:
I just ordered some of these from McMaster Carr.  I should have them tomorrow.Maybe someone can comment if these are the ones to use.9263K772 <http://www.mcmaster.com/nav/enter.asp?partnum=9263K772&pagenum=3390> Metric Viton O-Ring 3.5 mm Width, 16 mm ID, Packs of 10 (Same as 9263K11)  JLK


Date: Thu, 26 Jun 2008 15:03:39 -0400From: atwoodm at paragon-inc.comTo: nsrca-discussion at lists.nsrca.orgSubject: [NSRCA-discussion] O-Ring for Hatori Short Pipe
Can someone direct me to a source (or several) for replacement o-rings to connect the Hatori 821 short pipe to the Hatori 822 header?  Central is out of the authentic Hatori O-rings and won’t have more for a while.  Is there another source, or a suitable replacement available?  Thanks,Mark

_______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080626/e50d1ae7/attachment.html>