[NSRCA-discussion] YS110 question

[Ihncheol Park]

Mike,
 
53, 63, 91, 110 all came with airbleed idle needle on thottle barrel
(counterclockwise turn will lean it.)  
Troy Newman will probably chime in on setting the engine.  I usually start
from 1.5turn out on idle, and 2 turn on highspeed needle.  regulator later
for midrange rich or lean.
 
Ihncheol

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael Cohen
Sent: Sunday, July 27, 2008 9:43 PM
To: General pattern discussion
Subject: [NSRCA-discussion] YS110 question


The YS110 has a low end adjustment, and this is not something I am used to
adjusting when dialing in the low end.  I am used to setting the regulator
with the engine at or below 2000 rpm so that it has a nice idle that will
hold for 40-60 seconds with a nice transition back to full power.  The 110
instructions say to set the motor using the low speed needle at 2500 rpm and
not to touch the regulator at all.  Right now, the engine doesn't quite hold
an idle well enough, so before I abandon the instructions for my tried an
true method, I thought I would ask the list if I am missing something.

  _____  

Use video conversation to talk face-to-face with Windows Live Messenger. Get
started.
<http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_W
L_Refresh_messenger_video_072008>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080728/66a41feb/attachment.html>