[NSRCA-discussion] Incidence Meter

[John Konneker]

"G" and Jim, I realize my error soon after Jim's post.
Thanks to you both!
JLK> Date: Thu, 3 Jul 2008 20:12:41 -0500> From: glmiller3 at suddenlink.net> To: nsrca-discussion at lists.nsrca.org> Subject: Re: [NSRCA-discussion] Incidence Meter> > John and all,> > OK, I took a machinists square and put it on my workbench, put the inclinometer on the square on the bench and zero'd it. I then put the meter on the vertical arm and it read 90.0 back to horizontial and it read 0.1 back to vertical = 90.1 back to horizontal = 0.1 So as advertised, the device seems accurate and precise to +/- 0.1 degrees. Rotating mine front to back gives similar accuracy - your case may not be quite square, John.> > G> ---- John Konneker <jlkonn at hotmail.com> wrote: > > =============> > I just got mine.> What does yours show when you rotate it 180 degrees?> In other words you are reading it from the right side of the plane and you turn it to read from the left side.> Just turning the Wixey device, nothing else.> Mine shows a .5 degree difference.> JLK> Date: Thu, 3 Jul 2008 09:19:35 -0500> From: glmiller3 at suddenlink.net> To: nsrca-discussion at lists.nsrca.org> Subject: [NSRCA-discussion] Incidence Meter> > Here is a link to my post on RCU regarding the adaptation of the Wixey Inclinometer for use as an incidence meter.> > > http://www.rcuniverse.com/forum/m_7689336/tm.htm> > Great little doo dad for 40 bucks!> > G> _______________________________________________> NSRCA-discussion mailing list> NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> _______________________________________________> NSRCA-discussion mailing list> NSRCA-discussion at lists.nsrca.org> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080704/372a4dee/attachment.html>