[NSRCA-discussion] Aileron cut-off

[J N Hiller]

As promised last week, here is a photo showing how I cut ailerons etc. from
sheeted foam core flying surfaces using a 10" table saw.
The wing panel is positioned on top of a 1/4 x 14 x 36 plywood sheet with a
key attached to the bottom that slides in the table grove.
If anyone wants a full size photo let me know and I will send it direct.
Jim Hiller
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 118-1879_IMGa.JPG
Type: image/jpeg
Size: 66865 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080131/ec34611b/attachment.jpe