[NSRCA-discussion] Help for a Bully

[Norman Ledoyen]

Hello,
   Great info you supplied me. I really appreciate the help. Many thanks.
Norman L.


On 10/02/2008, William C. Harden <flyinbill1 at bellsouth.net> wrote:
>
>  A friend of mine gave me some advice a few years ago on how to convert a
> Bully 2.1 engine.  I copy here what he said.
>
>
>
> "This engine is made to run on gas or glow so it can easily be converted
> to gas. The glow plug is actually threaded into an adapter. To convert
> to gas, the adapter comes out so a spark plug fits. The carb might need
> rejetted, but wallboard carbs and parts are available everywhere (any
> lawnmower shop). And it would need an ignition which C&H Electronics sells (
> http://www.ch-ignitions.com).  C&H will actually take the engine and do
> the complete conversion if you want, they do this stuff all of the time.
>
>
>
> Bill
>
>
>  ------------------------------
>
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Norman Ledoyen
> *Sent:* Sunday, February 10, 2008 12:34 PM
> *To:* nsrca-discussion at lists.nsrca.org
> *Subject:* [NSRCA-discussion] Help for a Bully
>
>
>
>
> Hello,
>
>    I am looking for information on converting a Webra Bully from glow to
> gas. Can someone out there help me. I would prefer to have it done by
> someone familiar with this type of job. Hope to hear from anybody that can
> assist me. Thanks for your time.  Norman L.
> --
> Life's to short to dance alone folks.
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>



-- 
Life's to short to dance alone folks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080211/ae76d8bb/attachment.html