[NSRCA-discussion] Help for a Bully

[Ron Van Putte]

I think "wallboard carb" is supposed to be "Walbro carb".

Ron

On Feb 10, 2008, at 3:39 PM, William C. Harden wrote:

> A friend of mine gave me some advice a few years ago on how to  
> convert a Bully 2.1 engine.  I copy here what he said.
>
>
>
> “This engine is made to run on gas or glow so it can easily be  
> converted to gas. The glow plug is actually threaded into an  
> adapter. To convert to gas, the adapter comes out so a spark plug  
> fits. The carb might need rejetted, but wallboard carbs and parts  
> are available everywhere (any lawnmower shop). And it would need an  
> ignition which C&H Electronics sells (http://www.ch- 
> ignitions.com).  C&H will actually take the engine and do the  
> complete conversion if you want, they do this stuff all of the time.
>
>
>
> Bill
>
>
>
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca- 
> discussion-bounces at lists.nsrca.org] On Behalf Of Norman Ledoyen
> Sent: Sunday, February 10, 2008 12:34 PM
> To: nsrca-discussion at lists.nsrca.org
> Subject: [NSRCA-discussion] Help for a Bully
>
>
>
>
> Hello,
>
>    I am looking for information on converting a Webra Bully from  
> glow to gas. Can someone out there help me. I would prefer to have  
> it done by someone familiar with this type of job. Hope to hear  
> from anybody that can assist me. Thanks for your time.  Norman L.
> -- 
> Life's to short to dance alone folks.
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion