[NSRCA-discussion] 1.60DZ

[Tony]

Thanks, Ryan!

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ryan Smith
Sent: Friday, December 12, 2008 1:20 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] 1.60DZ

 

Tony,

 

I have found it to be around four turns out from being screwed in all the
way. This works pretty well for the 1.70 as well, as I have gotten one that
was quite a bit leaner than that from the factory. I think four turns out is
close-ish to flush, but I think it was a little off. I would try that and
see.

 

Hope this helps.

 

Ryan Smith

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081212/cec4dc00/attachment.html>