[NSRCA-discussion] 1.60DZ

[Ryan Smith]

Tony,

I have found it to be around four turns out from being screwed in all the way. This works pretty well for the 1.70 as well, as I have gotten one that was quite a bit leaner than that from the factory. I think four turns out is close-ish to flush, but I think it was a little off. I would try that and see.

Hope this helps.

Ryan Smith
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20081212/686629e4/attachment.html>