[NSRCA-discussion] FASST System
JShulman
jshulman at cfl.rr.com
Wed Aug 6 17:07:51 AKDT 2008
I'm assuming that was supposed to be the antenna
Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of CHV69 at aol.com
Sent: Wednesday, August 06, 2008 8:31 PM
To: nsrca-dist1 at lists.nsrca.org; nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] FASST System
I have question maybe some one can help with.
I just bought a Futaba Spread Spectrum Module for a 9C Super.
The instruction say to remove the transmitter.
Do they mean the antenna Or the actual transmitter.
If it is the transmitter, does it just unplug from something inside the
transmitter case?
Carl
Actual Futaba instructions below.
Attachment of the Module
CAUTION
Be sure to turn off the power of the transmitter before
you install or replace the module.
1 Ensure that the transmitter is set to the PPM (pulse
position modulation) mode. Please consult the
respective owner's manual for your particular transmitter
for information on how to do so.
2 W hile it is unlikely that the existing transmitter will
interfere with the radio frequency transmission of
the TM-7, we suggest removing it from the transmitter if
possible as a precaution.
3 Next, with the transmitter's power off, remove the
existing transmitter module and install the TM-7
module with care so that the connector pins of the
transmitter won't be damaged.
----------------------------------------------------------------------------
--
Looking for a car that's sporty, fun and fits in your budget? Read reviews
on AOL Autos.
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.5.12/1595 - Release Date: 8/6/2008
8:23 AM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080807/e14bb5b1/attachment.html>
More information about the NSRCA-discussion
mailing list