[NSRCA-discussion] FASST System

[CHV69 at aol.com]

I have question maybe some one can help with.
I just bought a Futaba Spread Spectrum Module for a 9C Super.
 
The instruction say to remove the transmitter.
Do they mean the antenna Or the actual transmitter.
If it is the transmitter, does it just unplug from something inside  the 
transmitter case?
 
Carl
Actual Futaba instructions below.
 
Attachment of the Module
CAUTION
Be sure to turn off the power of the  transmitter before
you install or replace the module.
1 Ensure that the  transmitter is set to the PPM (pulse
position modulation) mode. Please  consult the
respective owner's manual for your particular transmitter
for  information on how to do so.
2 W hile it is unlikely that the existing  transmitter will
interfere with the radio frequency transmission of
the  TM-7, we suggest removing it from the transmitter if
possible as a  precaution.
3 Next, with the transmitter's power off, remove the
existing  transmitter module and install the TM-7
module with care so that the  connector pins of the
transmitter won't be  damaged. 



**************Looking for a car that's sporty, fun and fits in your budget? 
Read reviews on AOL Autos.      
(http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 )
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080807/5ea986a1/attachment.html>