[NSRCA-discussion] Epoxy Question

[J N Hiller]

I'm with you Ron but it is kind off season here. It got up to about 35
today.
Jim

 -----Original Message-----
From: 	nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]  On Behalf Of Ron Van
Putte
Sent:	Wednesday, November 21, 2007 1:26 PM
To:	NSRCA Mailing List
Subject:	Re: [NSRCA-discussion] Epoxy Question

Nah.  That's not a no-brainer.  A no-brainer is whether to have
another beer.

Ron

On Nov 21, 2007, at 3:13 PM, wgalligan wrote:

> If this question was raised as a method for skinning wings, then
> why not use
> urethane glue. One part, spreads easy and cures hard and quickly
> with plain
> ole 02moisture.  Gives ample working time and unlike epoxy will
> expand with
> moisture to fill voids and between foam beads.  Available at local
> hardware
> stores and less expensive.
>
> Seems like a no-brainer to me.
>
> Wayne Galligan
>
> ----- Original Message -----
> From: "J N Hiller" <jnhiller at earthlink.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Wednesday, November 21, 2007 2:00 PM
> Subject: [NSRCA-discussion] Epoxy Question
>
>
>> Thin Epoxy? I have been using "HOBBYPOXY SMOOTH 'N' EASY" epoxy
>> finishing
>> resin to skin foam wings, spreading it with a scrap balsa
>> squeegee. It has
>> ample working time and is thinner than glue. Is this OK? I have
>> had no
>> problems using it on unsealed skins at about one ounce per 800 square
>> inches. I need to try sealing the skins on my next build.
>> Jim Hiller
>>
>>
>>
>
>
> ----------------------------------------------------------------------
> ----------
>
>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion