[NSRCA-discussion] Epoxy Question

[Ken Thompson]

I think I will, thanks for the offer;-)


----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, November 21, 2007 3:25 PM
Subject: Re: [NSRCA-discussion] Epoxy Question


> Nah.  That's not a no-brainer.  A no-brainer is whether to have  
> another beer.
> 
> Ron
> 
> On Nov 21, 2007, at 3:13 PM, wgalligan wrote:
> 
>> If this question was raised as a method for skinning wings, then  
>> why not use
>> urethane glue. One part, spreads easy and cures hard and quickly  
>> with plain
>> ole 02moisture.  Gives ample working time and unlike epoxy will  
>> expand with
>> moisture to fill voids and between foam beads.  Available at local  
>> hardware
>> stores and less expensive.
>>
>> Seems like a no-brainer to me.
>>
>> Wayne Galligan
>>
>> ----- Original Message -----
>> From: "J N Hiller" <jnhiller at earthlink.net>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Wednesday, November 21, 2007 2:00 PM
>> Subject: [NSRCA-discussion] Epoxy Question
>>
>>
>>> Thin Epoxy? I have been using "HOBBYPOXY SMOOTH 'N' EASY" epoxy  
>>> finishing
>>> resin to skin foam wings, spreading it with a scrap balsa  
>>> squeegee. It has
>>> ample working time and is thinner than glue. Is this OK? I have  
>>> had no
>>> problems using it on unsealed skins at about one ounce per 800 square
>>> inches. I need to try sealing the skins on my next build.
>>> Jim Hiller
>>>
>>>
>>>
>>
>>
>> ---------------------------------------------------------------------- 
>> ----------
>>
>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion