[NSRCA-discussion] Epoxy Question

[Ron Van Putte]

What does the temperature have to do with whether to have a beer?

It's 70 degrees here today in the Florida panhandle, but it's very  
cloudy (sob!).

Ron

On Nov 21, 2007, at 4:26 PM, J N Hiller wrote:

> I'm with you Ron but it is kind off season here. It got up to about 35
> today.
> Jim
>
>  -----Original Message-----
> From: 	nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]  On Behalf Of Ron  
> Van
> Putte
> Sent:	Wednesday, November 21, 2007 1:26 PM
> To:	NSRCA Mailing List
> Subject:	Re: [NSRCA-discussion] Epoxy Question
>
> Nah.  That's not a no-brainer.  A no-brainer is whether to have
> another beer.
>
> Ron
>
> On Nov 21, 2007, at 3:13 PM, wgalligan wrote:
>
>> If this question was raised as a method for skinning wings, then
>> why not use
>> urethane glue. One part, spreads easy and cures hard and quickly
>> with plain
>> ole 02moisture.  Gives ample working time and unlike epoxy will
>> expand with
>> moisture to fill voids and between foam beads.  Available at local
>> hardware
>> stores and less expensive.
>>
>> Seems like a no-brainer to me.
>>
>> Wayne Galligan
>>
>> ----- Original Message -----
>> From: "J N Hiller" <jnhiller at earthlink.net>
>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>> Sent: Wednesday, November 21, 2007 2:00 PM
>> Subject: [NSRCA-discussion] Epoxy Question
>>
>>
>>> Thin Epoxy? I have been using "HOBBYPOXY SMOOTH 'N' EASY" epoxy
>>> finishing
>>> resin to skin foam wings, spreading it with a scrap balsa
>>> squeegee. It has
>>> ample working time and is thinner than glue. Is this OK? I have
>>> had no
>>> problems using it on unsealed skins at about one ounce per 800  
>>> square
>>> inches. I need to try sealing the skins on my next build.
>>> Jim Hiller
>>>
>>>
>>>
>>
>>
>> --------------------------------------------------------------------- 
>> -
>> ----------
>>
>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion