[NSRCA-discussion] Masters Set-Up

[Tom Simes]

On Tue, 26 Jun 2007 09:39:09 -0700
"J N Hiller" <jnhiller at earthlink.net> wrote:

> Hello all, how about a new subject?
> I am returning to competition after several years out and wish to
> begin flying Masters. I haven't flown inverted a lot and find it quite
> challenging. Reverse point rolls from inverted got my full attention
> right away and I can learn to deal with it in time. The predominant
> problem I am experiencing is locking on to horizontal inverted flight.
> I am having difficulty releasing the elevator to the correct amount of
> down stick. I using about 40% expo and would be comfortable flying
> with the CG further back. Before I burn a lot of fuel trying to master
> the required stick movement I would like to get some recommendations
> on set-up and flight trimming. HELP!
> Thanks
> Jim Hiller

Hi Jim,

If you haven't already, I really recommend going through these trim
instructions with your airplane:

http://www.nsrca.org/trimA.htm


Tom
 
======================================================================
   "Z-80 system stack overflow.  Shut 'er down Scotty, the system's
         sucking mud" - Error message on TRS 80 Model-16B

Tom Simes                                       simestd at netexpress.com 
======================================================================