[NSRCA-discussion] YS fuel

[ron at inweldcorp.com]

Thanks guys for all the help!  I think I will start out with Pro-Pattern
20 and see how it goes.  I hope to also use this in my OS46FX 2-stroke
if it doesn't run too hot (running Omega 15 now).  Or maybe I should
leave my 2-stroke fuel as is.

Ron

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
rcmaster199 at aol.com
Sent: Monday, July 02, 2007 7:26 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] YS fuel

 

Ron

 

I have the exact same set-up. I am turning a 13x8 apc with mine. OS F
type plug and 22 1/2% , 20% oil Cool Power (fuel is 30% heli and
standard 15% CP, mixed 50:50). Nice, quiet, powerful set-up. I have also
tried 30% straight heli mix and this works extremely well, (as it does
in all 4 strokes) but I felt it was a bit over the top and expensive.
Not really necessary on the 50 sized Oxy

MattK


-----Original Message-----
From: ron at inweldcorp.com
To: nsrca-discussion at lists.nsrca.org
Sent: Sun, 1 Jul 2007 10:34 am
Subject: [NSRCA-discussion] YS fuel

I am just getting started in pattern.  I am building an Oxalys 50 and
using a YS63S engine.  This is my first four stroke engine and I am not
sure what fuel to use.  I figure some of you guys and your infinite YS
experience could give me a suggestion or two.

 

Thanks,

 

Ron Needham

 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  _____  


AOL now offers free email to everyone. Find out more about what's free
from AOL at  <http://www.aol.com?ncid=AOLAOF00020000000437> AOL.com.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070703/622ee0ee/attachment.html