[NSRCA-discussion] Repairing a de-laminated ARF wing PT2

[John Ferrell]

If you thin the epoxy with any solvent it will probably damage the foam. Use laminating epoxy. Warm it a little.
I buy syringes at a farm supply store. Their needles are too fine for  my purposes.

John Ferrell    W8CCW
"My Competition is not my enemy"
http://DixieNC.US

  ----- Original Message ----- 
  From: Jim Wilder 
  To: nsrca-discussion at lists.nsrca.org 
  Sent: Saturday, January 06, 2007 5:03 PM
  Subject: [NSRCA-discussion] Repairing a de-laminated ARF wing PT2


  I was reading with great interest the thresd on the de-lam repair, as I have one to do as well. I have a few questions:

  Does the epoxy need to be thinned down?

  What is a good source for syringes? 

  Thanks!


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070107/1e17a308/attachment.html