[NSRCA-discussion] low profile JR servo now Futaba 14mz question
Tony Stillman
tony at radiosouthrc.com
Tue Feb 27 11:59:57 AKST 2007
Ed:
What do you want to know?
Tony Stillman, President
Radio South
3702 N. Pace Blvd
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ed Miller
Sent: Tuesday, February 27, 2007 11:16 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] low profile JR servo now Futaba 14mz
question
Yes Tony, I am interested in hearing a little more detail on your statement
" I have the encoders in stock, as Futaba made a change in the production of
the 14MZ and sent me new ones to change out when needed "
TIA....Ed M.
----- Original Message -----
From: "Dr. Mike Harrison" <drmikedds at sbcglobal.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, February 27, 2007 10:59 AM
Subject: Re: [NSRCA-discussion] low profile JR servo?
Tony,
You had said something earlier about some upgrade for the14mz. When did
this become available. Is it an easy fix?
Mike
ps I need a non switch regulator. could you mail one? Also, I can't get my
sim9aeroflypro to work with my 9z. Do you need to fix something? I have
sent the sim to the company and they say it is fine.Thanks
----- Original Message -----
From: Tony Stillman
To: 'NSRCA Mailing List'
Sent: Friday, February 23, 2007 8:16 AM
Subject: Re: [NSRCA-discussion] low profile JR servo?
I don't know.
Tony Stillman, President
Radio South
3702 N. Pace Blvd
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----------------------------------------------------------------------------
--
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J.Oddino
Sent: Thursday, February 22, 2007 6:08 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] low profile JR servo?
What is the resolution of the shaft encoder?
Jim
----- Original Message -----
From: Tony Stillman
To: 'NSRCA Mailing List'
Sent: Wednesday, February 21, 2007 8:28 AM
Subject: Re: [NSRCA-discussion] low profile JR servo?
Yes, it does.
Tony Stillman, President
Radio South
3702 N. Pace Blvd
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----------------------------------------------------------------------------
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dean Pappas
Sent: Wednesday, February 21, 2007 10:03 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] low profile JR servo?
Hi Tony,
Does the throttle channel use the same encoder? If so, then it must be
some sort of absolute encoder.
Dean
Dean Pappas
Sr. Design Engineer
Kodeos Communications
111 Corporate Blvd.
South Plainfield, N.J. 07080
(908) 222-7817 phone
(908) 222-2392 fax
d.pappas at kodeos.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Tony Stillman
Sent: Wednesday, February 21, 2007 9:50 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] low profile JR servo?
Gordon:
I am just passing along the info as the comment was made. I have the
encoders in stock, as Futaba made a change in the production of the 14MZ and
sent me new ones to change out when needed.
Tony Stillman, President
Radio South
3702 N. Pace Blvd
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
--------------------------------------------------------------------------
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gordon
Anderson
Sent: Wednesday, February 21, 2007 8:40 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] low profile JR servo?
The futaba 14MZ flyer I have says "Gimbals with long-life
potentiometer, quad bearings, adjustable tension and detent."
In general encoders are not absolute positioning devices and you need
to define "home". Resolvers are absolute positioning devices but larger and
more costly.
--Gordon
--------------------------------------------------------------------------
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony Stillman
Sent: Wednesday, February 21, 2007 5:46 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] low profile JR servo?
The Futaba 14MZ uses shaft encoders on the sticks..
Tony Stillman, President
Radio South
3702 N. Pace Blvd
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
--------------------------------------------------------------------------
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Richards
Sent: Wednesday, February 21, 2007 7:18 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] low profile JR servo?
Hah, I didn't even think about the stick pots. Seems that would be the
first place they would try using shaft encoders.
Linear outputs from the servos would be great, also. Oh, wait a
minute, that was done 35 years ago with the KPS-11 servos. Nevermind....
:-)
Bob R.
Earl Haury <ehaury at houston.rr.com> wrote:
Isn't technology great - $2000+ TX and $100+ servos with everything
riding on a 50 cent pot on each end!
Earl
----- Original Message -----
From: Bob Richards
To: NSRCA Mailing List
Sent: Tuesday, February 20, 2007 8:37 PM
Subject: Re: [NSRCA-discussion] low profile JR servo?
When you say analog, I assume you are talking about the feedback
loop? I wonder how long it will be until we get shaft encoders in our
servos. Or, for that matter, the shaft encoder could be mounted to the
control surface itself.
Bob R.
"J.Oddino" <joddino at socal.rr.com> wrote:
Correct. Well kind of. Actually all of our servos are analog
but you are right, the super servos used the same principles as our modern
"digital" servos.
Jim O
----- Original Message -----
From: Bob Richards
To: NSRCA Mailing List
Sent: Tuesday, February 20, 2007 1:22 PM
Subject: Re: [NSRCA-discussion] low profile JR servo?
I was under the impression that the "Super Servos" were
actually first generation digital servos. Is that not correct?
Bob R.
----------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
----------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
----------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.441 / Virus Database: 268.18.3/694 - Release Date:
2/20/2007 1:44 PM
----------------------------------------------------------------------------
--
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
----------------------------------------------------------------------------
----
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list