[NSRCA-discussion] interference

[wgalligan]

If in doubt use Kevlar.   I had an issue like that once on a Cap and changed it to Kevlar pull/pull and problem went away.  Granted I was using a cheaper servo and PPM receiver but it did help.

Wayne Galligan
  ----- Original Message ----- 
  From: jfgreen 
  To: 'NSRCA Mailing List' 
  Sent: Monday, February 19, 2007 5:46 PM
  Subject: [NSRCA-discussion] interference


  In an effort to avoid turning my new pattern ship into a dirt seeking comet similar to my last Oly, I’ve been researching some possible causes,  I recently read from one source that one would or could have interference problems if when using steel pull-pull cables and installing the antenna parallel to them inside the fuse.  I have seen a number of AC at contests w/this configuration that seem to have no interference problems.  Your  experience, thoughts please.  THX - Jerry

   



  --
  No virus found in this outgoing message.
  Checked by AVG Free Edition.
  Version: 7.1.412 / Virus Database: 268.18.3/693 - Release Date: 2/19/2007




------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070220/ab88e581/attachment.html