[NSRCA-discussion] 9CAP question

[Ed White]

Mike,

Have you tried the Ailevator fuction?  See the Futaba FAQ for the 9C.

http://www.futabarc.com/faq/faq-8u-q586.html

Ed

Michael Cohen <precisionaero at comcast.net> wrote:       Other than using a Y harness on the elevator,  please let me know if I am missing something....
  
 On my 9CAP super, I have ailerons set on channel 1  and 6 using the flaperon function.  Due to having only one "wing function"  allowed, I have my independent elevators set to Channel 2 and 7 with the channel  7 slaved to channel 2 100% up, 100% down with "link" and "trim" both set to  ON.  Now, when I tried to mix rudder (master) to elevator (slave) for a 3%  mix, only channel 2's elevator moved.  I thought having the 2 to 7 mix with  "link" and "trim" both set to ON would have allowed both elevator halves to move  when rudder is used.  
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070901/3a1b71fe/attachment.html