[NSRCA-discussion] 9CAP question

[Michael Cohen]

With the 2 (master)/7 (slave) mix already set, when I select rudder as the 
master and the elevator as the slave, "link" disappears as a choice.  Trim 
does remain though.

----- Original Message ----- 
From: "Michael Laggis" <fishgod at mail2web.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Friday, August 31, 2007 4:12 PM
Subject: Re: [NSRCA-discussion] 9CAP question


Michael,
I had the same problem.  If you look in your PMix you should have I believe 
it is called link as well.  With that turned on both elevators moved.

Michael

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org on behalf of Michael Cohen
Sent: Fri 8/31/2007 1:50 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] 9CAP question


Other than using a Y harness on the elevator, please let me know if I am 
missing something....

On my 9CAP super, I have ailerons set on channel 1 and 6 using the flaperon 
function.  Due to having only one "wing function" allowed, I have my 
independent elevators set to Channel 2 and 7 with the channel 7 slaved to 
channel 2 100% up, 100% down with "link" and "trim" both set to ON.  Now, 
when I tried to mix rudder (master) to elevator (slave) for a 3% mix, only 
channel 2's elevator moved.  I thought having the 2 to 7 mix with "link" and 
"trim" both set to ON would have allowed both elevator halves to move when 
rudder is used.



--------------------------------------------------------------------------------


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion