[NSRCA-discussion] 9CAP question

[Michael Laggis]

Michael,
I had the same problem.  If you look in your PMix you should have I believe it is called link as well.  With that turned on both elevators moved.
 
Michael

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org on behalf of Michael Cohen
Sent: Fri 8/31/2007 1:50 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] 9CAP question


Other than using a Y harness on the elevator, please let me know if I am missing something....
 
On my 9CAP super, I have ailerons set on channel 1 and 6 using the flaperon function.  Due to having only one "wing function" allowed, I have my independent elevators set to Channel 2 and 7 with the channel 7 slaved to channel 2 100% up, 100% down with "link" and "trim" both set to ON.  Now, when I tried to mix rudder (master) to elevator (slave) for a 3% mix, only channel 2's elevator moved.  I thought having the 2 to 7 mix with "link" and "trim" both set to ON would have allowed both elevator halves to move when rudder is used.  
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 4073 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070831/68773890/attachment.bin