[NSRCA-discussion] YS160DZ

[twtaylor]

I concur

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mike Hester
Sent: Friday, August 24, 2007 8:38 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] YS160DZ

 

Jim Ivey tought me everything I know about YS engines. I REALLY miss the
guy.

 

It's about 1 1/4 turns out.

-Mike

----- Original Message ----- 

From: Gerald Gallagher <mailto:ggall at bellsouth.net>  

To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Friday, August 24, 2007 8:31 AM

Subject: [NSRCA-discussion] YS160DZ

 

Can someone tell me what the average hi speed needle setting on a YS160DZ
is? I know about the rich to lean & back off a few clicks but something
sounds different than a normal running engine like the 140L's I have. It
will run at 1 1/2 turns at 8400 & 3 1/2 also. Looking for what others have
theirs set at. 

 Normally Jim would help me, but not anymore. What a loss. 

 

Jerry Gallagher

 

 


 
<http://promos.hotbar.com/promos/promodll.dll?RunPromo&El=&SG=&RAND=35925&pa
rtner=hbtools> Upgrade Your Email - Click here!


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070824/c07111e3/attachment-0001.html