[NSRCA-discussion] YS160DZ

[Mike Hester]

MessageJim Ivey tought me everything I know about YS engines. I REALLY miss the guy.

It's about 1 1/4 turns out.
-Mike
  ----- Original Message ----- 
  From: Gerald Gallagher 
  To: 'NSRCA Mailing List' 
  Sent: Friday, August 24, 2007 8:31 AM
  Subject: [NSRCA-discussion] YS160DZ


  Can someone tell me what the average hi speed needle setting on a YS160DZ is? I know about the rich to lean & back off a few clicks but something sounds different than a normal running engine like the 140L's I have. It will run at 1 1/2 turns at 8400 & 3 1/2 also. Looking for what others have theirs set at. 
   Normally Jim would help me, but not anymore. What a loss. 

  Jerry Gallagher

   



   



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070824/f8d5a14b/attachment.html